Extends out 5/8″ further than the original hook.
Made in the USA
John Deere iMatch™ Accessories
KBOH/BoltOnHooks LLC is proud to introduce the Extended iMatch™ Hook and the “TALL” Extended iMatch™ Hook for the CAT1 John Deere iMatch™ Quick Hitch system with the adjustable top hook. These new hooks extend out 5/8″ over original hook making implement changes faster, easier, and in some cases even possible. The “TALL” version also sits 2-7/8″ higher/taller than our other version (and the OEM version).
This replacement hook DOES NOT fit other lower cost imported hitches from Harbor Freight and other sources. Please look HERE for that version.
Specifications:
- Extends out 5/8″ further than the original hook
- John Deere Green Powder Coat finish matches OEM color
- 1″ thick steel
- Installs in 5 minutes or less!
- No modifications to the iMatch™ hitch itself
- “TALL” version sits 2-7/8″ higher
- Made in the USA
“TALL” Extended iMatch™ Hook
Extends out 5/8″ further than the original hook, and sits 2-7/8″ higher.
Made in the USA
iMatch™ Adjustable Hook Pins
KBOH/BoltOnHooks LLC is proud to introduce the iMatch™ Adjustable Hook Pins. These pins will allow you to remove the existing bolts that holds the hook onto the John Deere iMatch™ frame to facilitate easy height changes with no tools required. These pins also add in a bit of extra “slop” or “play” that will let the implement attach easier in most cases. 100% made in the USA of the finest materials available and zinc plated to resist rust and corrosion.
Specifications:
- Zinc Plated to resist rust
- Bow-Tie Locking Cotters™ will not slip off accidentally
- Replaces cumbersome bolts
- Works with OEM hook or our extended hook
- 5/8″ x 2″
- Shipping Note: If you are just ordering pins, you can choose the USPS option, we can use Ground Advantage and refund $7.00 to $10.00 of the Flat Rate fee charged.
- 100% Made in the USA
iMatch™ Adjustable Hook Pins
Sold as a pair only
Two pins, two Bowtie Cotters.
-Shipping Note: If you are just ordering pins, you can choose the USPS option, we can use Ground Advantage and refund $7.00 to $10.00 of the Flat Rate fee charged.
iMatch ™ ChainBox
KBOH/BoltOnHooks LLC is proud to introduce the iMatch™ ChainBox. The ChainBoxes will mount to the left or right side (or both!) of the CAT1 John Deere iMatch™ Quick Hitch to facilitate the storage of chains, straps, slings, tools, ect. Optional accessories can be added including a lid or up to three pairs* of Quick-Fist Clamps. Other accessories are planned for the future.
Each ChainBox includes mounting hardware and one piece of TRIM-LOC edge trim to protect the top edge from chains sliding across it.
Each ChainBox measures approximately 4″ x 5″ x 12″ and will hold about 20 feet of 5/16″ chain or 14 feet of 3/8″ chain. An additional feature (not shown) are the slots in the bottom that allows water to drain out. The ChainBox is three-sided, and uses the iMatch itself as the 4th side to save materials and cost’s.
100% Made in the USA of the finest materials available, the ChainBoxes are laser cut from heavy gauge steel sheet and CNC bent for accuracy and strength. Finally they are powder coated John Deere green to match your equipment.
*Note: The rear mounted (towards the implement) Quick-Fist Clamps may interfere with some implements.
*Note: USPS Flat Rate Shipping is not available when an order includes this product.
iMatch™ ChainBox
Includes mounting hardware and TRIM-LOC edge protector.
Made in the USA
Each ChainBox measures approximately 4″ x 5″ x 12″ and will hold about 20 feet of 5/16″ chain or 14 feet of 3/8″ chain. An additional feature (not shown) are the slots in the bottom that allows water to drain out. Optional lids sold below.
Note: USPS Flat Rate Shipping is not available when an order includes this product.
ChainBox Quick-Fist Clamps
One Pair, includes special mounting hardware.
-Add up to three pairs per ChainBox
-Holds objects 1″ to 2.25″
-2 clamps support 50lbs
-Made in the USA
Quick Hitch Bushing Sets
KBOH/BoltOnHooks LLC is proud to introduce two Quick Hitch Bushing Sets. These are complete bushing sets that include the lower bushings as well as the ones for the top link. Works with virtually every Quick Hitch sold today, and sold as complete sets only.
Specifications for both sets:
- Zinc Plated to resist rust
- CAT 1 to CAT 3 as required for most Quick Hitches on the market today
- Top Link Bushings are 2″ wide
- Made in India
Quick Hitch Bushings
Sold as a complete set only, these “mushroom” or “stepped” style bushings are for implements with open ended lift arm pins.
- Top Link Bushings are 2″ wide.
- Comparable to JD part numbers BW15058 and LP19969
Replacement roll pins available
Click picture for more info
Lift Arm Bushings
These Lift Arm Bushings are sold as a complete set only, they adapt the Category 1 lower lift arm and top link pins to Category 3 size that most quick hitches require. These are only used for implements that have “captive” or “clevis” style lift arm pins.
- Lift Arm Bushings are 1-3/4″ wide
- Top Link Bushings are 2″ wide
If you have the open ended lift pins, you need the “mushroom” or “stepped” style bushings (Sold above)
Click picture for more info.
QH Spring Pins
These are replacement Spring / Roll Pins for the large “mushroom” or “stepped” style Quick Hitch Bushings sets.
- 7/16″ x 1.5″ size
- Two per pack
- Should fit bushings from all OEM’s
- Made in the USA