Corner Animation

Hook and Clevis Mount

Kioti w/Stump

Hanging SnowBlower

JD4700 w/Stump

Travis in KY



Matt's Clevis


Gregs 2520 Header Picture

Due to unexpected order volumes, shipping may be delayed up to 48 hours. We are very sorry for the inconvenience.

JD 1-Series Accessories



*A $13.00 fee is added in the cart to all orders for USPS Priority Shipping in the United States.*

Please read the FAQ page for Canadian/International Orders.


Some of the products on this page will fit into a USPS Small Flat Rate Box,
so we will refund $6.00 for reduced shipping fees if we can use one.


Bolt On Hooks™
Safety Green Hi-Vis

Men's size M, L, XL, 2XL and 3XL
Pick Size:


$15.00 each
On Sale! Now $12.00

New Combo Pricing, Buy Both and SAVE!

Scroll Down for Savings!

John Deere 1-Series Differential Pedal Extension

KBOGH/BoltOnHooks LLC is proud to introduce the JD 1-Series Pedal Extension for the 1023e, 1025r, and 1026r models. Now you can find the differential lock pedal anytime, even while wearing your biggest snow boots in the dead of winter, or your mud-packed boots in the summer. This unique design allows the pedal to go all the way to the floor allowing for full differential lock engagement. All you need is two 7/16" or small adjustable wrenches for a quick and simple installation.

• Laser cut parts
• Black Powder Coat finish matches OEM color
• Grade #8 hardware included
• 1.5" x 2.5" plate area to rest your heel on
• Anti-slip tape included
• Installs in 5 minutes or less!
• Simple installation with two 7/16" wrenches
• No modifications to tractor
Not compatible (or needed) with the new Mauser cab from JD
Made in the USA

Diff Lock Video Now Posted!

JD 1-Series Diff Lock Extension

<-Includes everything pictured at left.


$40.00 each

John Deere 1025R/1026R/X-Series
Seat Spring Upgrade

KBOGH/BoltOnHooks LLC is proud to offer upgraded seat springs for John Deere 1025R/1026R and some X-Series tractors. These are an upgraded version of the "PSRUMORS" springs made famous on the GreenTractorTalk forum. The new springs are rated for 130 pounds each (260 pounds per pair) and offer a performance increase of over 25% from the original OEM springs, and a 10% increase over the current ones.

Known X-Series models with the LVA16309 Suspension Seat Platform these will fit: x575, x728, x748, x758

Some history on the seat springs:
-> The original OEM springs (JD Part #AM153100) were rated for 103 pounds each (206 pounds per pair).
-> The PSRUMORS upgrade replacements were rated for 125 pounds each (250 pounds per pair).
-> Sometime in late 2013 thru mid 2014 John Deere updated the springs (JD Part #AM145323), they are now rated at 118 pounds each (236 pounds per pair). These springs are still being used today by John Deere (to the best of our knowledge).
-> November 2015: KBOGH/BoltOnHooks LLC introduces upgraded springs rated for 130 pounds each (260 pounds per pair).
-> November 2016: All springs are now Yellow Zinc Plated-no painting needed and ready to install.

-> Spring FAQ: Can you make the springs with a higher weight rating?
No, they cannot be made any stiffer-if we used a heavier gauge wire the coils would hit each other as the spring compressed, and severely limit the travel causing it to bottom out faster. Some guys have threaded to original springs inside of the new ones, or experimented with pneumatic "test" balls used for plumbing to achieve a heavier rating, some even used pool noodles. There are a few threads on the GTT forum detailing this if you search a bit.

• Yellow Zinc Plated, ready to install!
• Rated for 130lbs each, 260lbs per pair
• Installs in 15 minutes or less!
• Simple installation with only a 3/16" allen and 7/16" wrench
• No modifications to tractor
Made in the USA

JD 1025R/1026R Seat Spring Upgrade Set

260lb rating per pair

Includes Two Yellow Zinc
Plated Springs


$30.00 pair

JD 1-Series Diff Lock Extension Pedal


JD 1025R/1026R Spring Upgrade Set

Order BOTH and SAVE!


JD 1-Series
DIFFLOCK and Spring Combo

$65.00 each

Save $5.00

Seat Spring Video Now Posted!

John Deere #260 Backhoe Steps

KBOGH/BoltOnHooks LLC is proud to an add-on step for the John Deere #260 Backhoe. These steps will mount to the left or right of the machine, and reduce the step up onto the machine to almost in half from approximately 20.5" high down to only 12.5".

• Laser cut parts
• Black Powder Coat finish matches OEM color
• Grade #5 and #8 hardware included
• 3" x 4" non-slip step area
• Mounts Left or Right
• Reduces first step height to 12.5" from 20.5"
• Installs in 30 minutes or less!
• Simple installation with pliers, 1-1/16", 1-1/8", and 9/16" wrenches or sockets (or small and large adjustable wrenches)
• No permanent modifications to backhoe
Made in the USA

JD #260
Backhoe Step

<-Includes Plate, Step Tube (aka the "Crown"), Hardware and Instructions

Buy a PAIR and SAVE!
Select from dropdown ->



$65.00 each

$120.00 pair

TTWT Install Video Now Live!